Not all parts are still available for various reasons including obsolescence, supply, sources, etc. Items available will be noted as such. Some old and used parts may be available on a very limited basis. Contact us for more information. -trf
Front Panel
| Description | Qty req’d | Part | Price |
| Replace or renew that I-8080 front panel plastic with a new front panel set! I-8080 Front Panel Sub-assembly- consists of the following items marked with * (Price includes labor for fitting and positioning) | ` | 95-0808201 | N/A |
| * Plastic panel, clear 3/16″ drilled | 1 | 93-3010006 | $15.00 |
| * Plastic panel, red 1/8″ drilled | 1 | 93-3010007 | $12.00 |
| * Photo Mask, 8080 front panel (rev. 2) NOTE: The mask is an exact computer-generated reproduction of the original I8080 mask and is laser-imaged onto 4-mil film. This results in each mask being a “master” with crisp, sharp, perfectly aligned graphics, as opposed to the originals that were second, third and fourth generation copies of the original hand-layout artwork which was photographically reproduced. | 1 | 93-3010015 | N/A |
| * Paper Backing, die-cut NOTE: The paper mask is die-cut from 90# white index stock using a new computer-generated cutting die. Its purpose is to provide contrasting white background to the clear areas of the IMSAI 8080 film mask. Alignment perfectly matches the photo mask above. Due to variations in original 8080 production, no guarantee is made that your old film mask will align without some minor trimming. | 1 | 93-3010016 | $4.00 |
| * Spacer, nylon #6 1/4″ dia. 1/4″ length | 8 | 21-3600004 | $1.50/ set of 8 |
| * Spacer, nylon #6 1/4″ dia. 7/16″ length | 8 | 21-3600008 | $1.50/ set of 8 |
| * Screw, 6-32 x 1 1/4″ BHS black oxide | 8 | 20-3916002 | $3.00/ set of 8 |
| Switch Bracket- Original specification, critical to mechanical alignment and support when mounting switches to the front panel circuit board. | 8 | 93-3010011 | $30.00 |
| Screw, #4x 1/4″ Slotted Hex Head self-tapping Type A Sheet Metal (used to mount front panel switches to the switch bracket). | 22 | 20-2203001 | $2.50/ set of 22 pieces |
Replacement front panel switches and handles
| Description | Qty req’ | Part Numbe | Price |
| I-8080 Front Panel (CPA) Switch Kit Full set of 22 switches with paddles – the original IMSAI I-8080 specification! | 1 | 26-5808002 | N/A (switch body available. See below) |
| Red Paddle Switch, momentary RED MOM (Deposit, Run/Stop positions) (Limited Supply!) | 2 | 26-1500003 | $18.50 ea. |
| Blue Paddle Switch, momentary BLUE MOM (Examine, Reset, Single Step positions) | 3 | 26-1500004 | N/A |
| Red Paddle Switch, on/on RED ONO (Address/Data and Address/Programmed Input positions) (Limited Supply!) | 8 | 26-1500002 | $17.50 ea. |
| Blue Paddle Switch, on/on BLUE ONO (Address/Data and Address/Programmed Input positions) | 8 | 26-1500001 | N/A (switch body less paddle available. Contact us.) |
| Red Rocker Switch, on/on RED ONO (Power On/Off) | 1 | 26-1600001 | $17.50 ea. |
| 8080 Front Panel Switch Handle (paddle) Kit Full set of 22 replacement handles in the correct colors. Eleven blue paddle-style, ten red paddle-style, and one red rocker-style. New, fresh stock! (original IMSAI I-8080 specification!) | 1 | 26-6608001 | N/A (switch body less paddle available. Contact us.) |
| Handle only, Red Paddle (Limited Supply!) | 10 | 26-9000010 | $9.00 |
| Handle only, Blue Paddle | 11 | 26-9000020 | N/A |
| Handle only, Red Rocker (Power On/Off) (Limited Supply!) | 1 | 26-9000030 | $9.00 |
Replacement handle note: We’ve had a number of folks who have ordered complete switch assemblies when all they really need is just the handle, or paddle. The handles are easily removed and replaced without having to disassemble anything. Unless the handle is completely missing, just slip a thin-bladed screwdriver along one side or the other of the switch handle (where the plastic handle is attached to the switch body bracket), and gently pry or twist the the screwdriver while pulling the handle to the opposite side. This will compress the handle body and bracket enough to allow the molded-in handle pivot pin to slip past the switch body bracket.
To install a new handle, position the handle over the switch actuator and slip the pivot pin of the new handle into one side of the switch handle bracket, pulling the switch handle slightly to one side. Use a thin-bladed screwdriver to gently compress the other side of the handle so that the pivot pin can slide into the switch body bracket pivot hole. This is easier to do than it is to explain! This should save much time, money, and effort for those of you renovating or restoring your IMSAI.